Exothermic Welding

Exothermic welded connections for earthing and lightning protection

Exothermic welding fuses conductors into one permanent joint, so the connection does not loosen or build up resistance the way a mechanical clamp can over time.

Exothermic weld joining a copper conductor to an earth rod.

What this service covers

Thunder Ohms Consulting installs permanent exothermic welded connections for earthing, bonding and lightning protection systems. This includes copper-to-copper conductor joints, copper-to-earth rod connections and earth grid junctions.

A mechanical clamp relies on pressure between two surfaces. Corrosion, vibration and soil movement can loosen that contact and raise its resistance. An exothermic weld fuses the conductors together, so the joint can carry fault and lightning current at least as well as the conductor itself.

Welded joints are especially useful below ground and inside concrete, where connections cannot easily be inspected or tightened later. We plan each connection with the rest of the earthing and lightning protection design so the full path to earth stays continuous.

How we approach it

  1. Confirm conductor sizes, connection types and where each joint is needed.
  2. Clean and dry the conductors and moulds before welding.
  3. Make the exothermic weld and check the finished joint.
  4. Record the connections as part of the earthing or LPS documentation.

Need advice for a specific property?

Share the site type, location, and what you need checked or protected. Thunder Ohms can help confirm the practical next step.